16.8.2

Comparable specifications
ASME SFA A 5.9 / AWS A5.9: ER16-8-2 (UNS S16880)
EN ISO 14343-A: ~ 16 8 2

Description and applications*
* Illustrative, not-exhaustive list

Filler metal of this classification is used primarily for welding stainless steel such as Types 16-8-2, 308H, 316H, 321 and 347 with carbon content ranging from
0.04% to 0.10% for high pressure, high temperature piping systems.
Not generally used for corrosion resisting applications, but for high temperature applications where good thermal embrittlement resistance and creep strength
are required. The weld deposit – usually characterized by Ferrite Number not higher than 5 FN – shows good hot-ductility properties, which allow greater freedom from weld or crater cracking even under restraint conditions.
The weld metal is usable in either the as-welded condition or solution-treated condition. Typical service temperature up to ~800°C. This filler metal is also able to provide cryogenic toughness properties down to-196°C.

Mainly used for applications such as:
• catalytic crackers;
• steam piping;
• furnace parts;
• gas and steam turbines;
• petrochemical;
• chemical processing;
• power generation industries.

Weldable base materials*
* Illustrative, not-exhaustive list
High carbon (≥ 0.04%) austenitic stainless steels, such as: 304H, 308H, 316H,321, 347.

All-weld metal mech. properties*
* For reference only values
Tensile strength (Rm): ≥ 510 N/mm2
Elongation: ≥ 25%
Yield Strength (Rp0.2): ≥ 320 N/mm2

Chemical composition *For reference only values
CMnSiSPNiCrMoCu
0.041.000.30maxmax7.5014.501.00max
0.082.000.650.0300.0309.5016.502.000.75
Standard packaging data*
Welding
process
Product typeDia (mm)Packing typeWeight
kg (lbs)
Length
mm (inches)
GMAW **filler wire0.80 - 1.20 (0.030 - 0.047)spools BS300 / D30015 (33)n.a.
GTAW **filler rod1.60 - 4.00 (1/16 - 5/32)cardboard boxes / tubes5 (11)1000 (39.4)
SAW **filler wire1.60 - 4.00 (1/16 - 5/32)basket rims B45025(55)n.a.
* Other sizes and packing types are available upon request
** GMAW: gas metal arc welding; GTAW: gas tungsten arc welding; SAW: submerged arc welding

Marking
Each filler rod for GTAW welding is durably marked with an identification traceable to the unique product type. Welding filler materials wound on spools
or in coils are durably marked on the coil or spool with an identification traceable to the unique product type.
The outside of each unit package is suitably labelled with at minimum the following data: grade, diameter, heat, lot no., classifications.
Customized labels are available upon request.

Lot classification
All our productions fulfil the Class S3 requirements acc. to EN ISO 14344.

We don't push product.
We push expertise.