Ni-Fe-Cr Filler Metal
INCOLOY Filler Metal 65 is used for gas-tungsten-arc welding of INCOLOY alloy 825 and other nickel-iron-chromium-molybdenum-copper alloys of similar composition. The weld metal is highly corrosion resistant, particularly in reducing chemicals such as sulphuric and phosphoric acids. INCOLOY Filler Metal 65 can also be used for depositing overlays on carbon and low alloys steels.
Specifications
AWS A5.14 ERNiFeCr-1 (UNS N08065)
ASME II, Part C, SFA-5.14, ERNiFeCr-1 (UNS N08065)
ASME IX, F-No.45
*BS 2901 NA41
*(EN) ISO 18274 – SNi8065 (NiFe30Cr21Mo3)
*Supply to these specifications available upon request.
For manufacture to ASME III (NCA3800, NB2400), Rolls Royce, AMS and other specifications please refer your inquiry to the Technical Department prior to order placement.
Approvals
Please confirm details of current scope of approvals with the Technical Department prior to order placement.
| Limiting Chemical Composition | |||
|---|---|---|---|
| Ni+Co: | 38.0-46.0 | Cr: | 19.5-23.5 |
| C: | 0.05 max. | Al: | 0.20 max. |
| Mn: | 1.0 max. | Ti: | 0.60-1.20 |
| Fe: | 22.0 min. | Mo: | 2.50-3.50 |
| S: | 0.03 max. | P: | 0.03 max. |
| Si: | 0.50 max. | Others: | 0.50 max. |
| Cu: | 1.5-3.0 | ||
| Minimum Mechanical Properties | |
|---|---|
| Tensile Strength, psi | 80,000 |
| MPa | 552 |
| Elongation, (4d) % | 25 |
| Available Product Forms | ||||||||
|---|---|---|---|---|---|---|---|---|
| mm | 0.8 | 0.9 | 1.0 | 1.14 | 1.2 | 1.6 | 2.4 | 3.2 |
| in | 0.030 | 0.035 | 0.040 | 0.045 | 0.047 | 0.062 | 0.093 | 0.125 |
