Comparable specifications
ASME SFA A 5.14: ERNiCu-7
EN ISO 18274: Ni 4060 – NiCu30Mn3Ti
BS 2901: Pt 5 NA 33
Werkstoff Nr.: 2.4377
Description and applications*
* Illustrative, not-exhaustive list
This grade may be used for:
• welding of nickel-copper alloys to themselves;
• welding of the clad side of nickel-copper alloy-clad steel;
• surfacing of steel;
• welding of dissimilar metals (this alloy to steel, to copper and copper alloys);
• overlaying steel after first applying layer of 610 nickel;
• use in high-grade plant/engineering (primarily for the petro-chemical industry);
• fabrication of seawater evaporation plants and marine equipment.
NiCu7 contains enough titanium to control weld-metal porosity on welding processes.
Weldable base materials*
* Illustrative, not-exhaustive list
Monel alloys 400 and 404
All-weld metal mech. properties*
* For reference only values
Tensile strength (Rm): ≥ 450 N/mm2
Elongation: ≥ 30%
Yield Strength (Rp0.2): ≥ 180 N/mm2
Charpy-V Impact (R.T.): ≥ 80 J
| Chemical composition *For reference only values | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Fe | P | S | Si | Cu | Ni | Co | Ti | Al | Nb+Ta |
| max | 3.00 | 0.50 | max | max | max | 28.00 | 62.00 | max | 1.50 | max | max |
| 0.15 | 4.00 | 2.50 | 0.020 | 0.015 | 1.00 | 32.00 | 69.00 | 1.00 | 3.00 | 1.00 | 0.50 |
| Standard packaging data* | |||||
|---|---|---|---|---|---|
| Welding process | Product type | Dia (mm) | Packing type | Weight kg (lbs) | Length mm (inches) |
| GMAW ** | filler wire | 0.80 - 1.20 (0.030 - 0.047) | spools BS300 / D300 | 15 (33) | n.a. |
| GTAW ** | filler rod | 1.60 - 4.00 (1/16 - 5/32) | cardboard boxes / tubes | 5 (11) | 1000 (39.4) |
| SAW ** | filler wire | 1.60 - 4.00 (1/16 - 5/32) | basket rims B450 | 25 (55) | n.a. |
| SMAW ** | core wire for electrodes | 1.60 - 5.00 (1/16 - 0.197) | wooden boxes | 500 - 750 (1100 - 1650) | 250 - 450 (10 - 18) |
** GMAW: gas metal arc welding; GTAW: gas tungsten arc welding; SAW: submerged arc welding; SMAW: shielded metal arc welding
Marking
Each filler rod for GTAW welding is durably marked with an identification traceable to the unique product type. Welding filler materials wound on spools or in coils are durably marked on the coil or spool with an identification traceable to the unique product type.
The outside of each unit package is suitably labelled with at minimum the following data: grade, diameter, heat, lot no., classifications.
CE marking type-testing performed and available.
Customized labels are available upon request.
Type approvals
TUV Nord Kennblatt nr. 06020 (GMAW)
TUV Nord Kennblatt nr. 06019 (GTAW)
Lot classification
All our productions fulfil the Class S3 requirements acc. to EN ISO 14344.
